CARACTERISTICAS PRINCIPALES
SolidPRO™ Pump for Solids Handling
with "Flapper Valve" technology
Yamada's SolidPRO™ Pump is designed to pump fluids containing solids up to 2 inches (50mm) in diameter. Built on the foundation of the NDP-Series line of pumps, the SolidPRO incorporates Yamada's patented Stall-free/Lube-free Air Valve and rugged, easy-to-service bolted construction.
Designed for durability in the field, the SolidPRO's innovative flap-type check valve technology provides streaming passage of solids while minimizing clogging and downtime. Four external bolts release valve covers on either side permitting service and maintenance without removing the pump from installation.
Design Features
-
Heavy-duty flap check valve permits passage of solids up to 2 inches
-
Easy access to valve chambers for ease of maintenance
-
Vented diaphragm chambers alleviate problems associated with trapped air/gas
-
In-line maintenance facilitates servicing pump without removal from installation
-
Top-suction / bottom-discharge design keeps solids from settling in pump
-
Non-lubricated air valve
-
Bolted construction
-
Short-stroke technology improves diaphragm life
-
Outside-accessible air valve
-
Modular pilot valve design requires no dynamic O-rings to replace or repair
Design Specifications
Model Number: NDP-50FAN
Nominal Diameter: 2 inch (50 mm)
Fluid Connections
Suction: NPT 2 or ANSI flange
150# 2" equivalent
Discharge: NPT 2 or ANSI flange
150# 2" equivalent
Air Connection
Supply: NPT 3/4"
Exhaust: NPT 1"
Normal Air Supply Pressure
30 -100 PSI (0.2 -0.7 MPa)
Maximum Discharge Pressure
100 PSI (0.7 MPa)
Discharge Volume per Cycle
0.79 GPM (3.0 L/min)
Slurry Limitation: maximum 2" solids
Maximum Operating Noise: 94dB
Weight: 110 lbs (50 kg)
Información Adicional: Software requerido (de descarga gratuita):
 |
